Sign up for a training class by clicking on the class name and filling out the form.
Download a PDF of the training calendar here.
Calendar of Events
S Sun
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
0 events,
0 events,
0 events,
2 events,
Traffic Control Technician
Traffic Control Technician
This 8-hour course was developed by LIUNA Training and is approved by NDOT to meet the requirements for personnel trained in Traffic Control on NDOT projects. This course is an introduction to temporary traffic control in work zones. Topics covered include the concepts, techniques, and practices used in the installation and maintenance of traffic control […]
First Aid/CPR/AED
First Aid/CPR/AED
This 8-hour certification class helps non-medical professionals provide assistance in times of crisis.The first part of the class covers best practices for first aid for a wide range of medical conditions. The CPR portion of the class provides methods and practice for treating both adults and children during a cardiac emergency. *Personal Protective Equipment Required.
2 events,
Traffic Control Supervisor
This 16-hour course was developed by LIUNA Training and is approved by NDOT to meet the requirements for personnel trained in Traffic Control on NDOT projects. This course covers the design, setup and maintenance of temporary traffic control in highway work zones. Topics covered include the implementation of traffic control plans; techniques for safe installation […]
Lead Action Level
Lead Action Level
This 4-hour course covers the hazards and precautions used on jobs involving lead exposure. This course is intended to provide awareness to members and does not comply with EPA or OSHA regulations for workers who may be potentially exposed to elevated lead levels, or for those working in target housing or child-occupied facilities. Topics covered […]
2 events,
NDOT Flagger
NDOT Flagger
This 4-hour certification course has been approved by the Nevada Department of Transportation and covers procedures for flaggers working on NDOT projects. All flaggers on these projects must have a certification of training in their possession while working. Topics include work zone hazards and safety; state regulations; flagging PPE and equipment; and flagging procedures.
0 events,
0 events,
1 event,
NDOT Flagger
NDOT Flagger
This 4-hour certification course has been approved by the Nevada Department of Transportation and covers procedures for flaggers working on NDOT projects. All flaggers on these projects must have a certification of training in their possession while working. Topics include work zone hazards and safety; state regulations; flagging PPE and equipment; and flagging procedures.
1 event,
OSHA 30
This 32-hour course covers workplace safety and health hazards and the regulations that protect you on the job site. Many construction contractors are requiring their employees to have an OSHA 30 card. Topics include job site hazard recognition, avoidance, and prevention; the fatal four; PPE; health hazards; stairways and ladders; worker rights; and employer responsibilities.
1 event,
1 event,
1 event,
0 events,
0 events,
2 events,
Forklift Operation and Safety
This 16-hour course covers the hazards and safe operation of rough terrain forklifts (also known as telehandlers). Topics include types of forklifts and terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include operating rough terrain forklifts of various sizes under simulated job site conditions. […]
Concrete Worker Part 1
This 40-hour course introduces members to concrete work and covers the following topics; safety and health hazards of concrete work; site preparation; form building and setting; forming systems; estimating concrete quantities; placement and consolidation; and finishing and curing concrete. Participants will gain knowledge and practical experience in the placement and finishing of concrete. *Personal Protective […]
2 events,
Skid Steer Operation and Safety
This 16-hour course covers the hazards and safe operation of skid steer loaders (i.e. Bobcat). Topics include terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include pre-operational inspections, review of the Owner’s Manual, and operating skid steers with forks under simulated job site conditions […]
2 events,
First Aid/CPR/AED
First Aid/CPR/AED
This 8-hour certification class helps non-medical professionals provide assistance in times of crisis.The first part of the class covers best practices for first aid for a wide range of medical conditions. The CPR portion of the class provides methods and practice for treating both adults and children during a cardiac emergency. *Personal Protective Equipment Required.
0 events,
0 events,
1 event,
Construction Math
This 40-hour class provides a foundation for all of the math used in construction through classroom and hands-on activities. Topics include basic math operations (ASMD); working with fractions and decimals; layout and squaring; area and volume calculations and formulae; slope ratios and percent of slope; offsets and stations; and differential leveling. *Personal Protective Equipment Required.
1 event,
1 event,
2 events,
Union Meeting at 7 p.m.
Union Meeting at 7 p.m.
All Local 169 members are invited to the monthly meeting. Learn what your Union is planning and working towards. Show up, show your support, and be an active member in your Union. An involved member is a strong member! Feel the Power! Meetings are at the Union Hall at 570 Reactor Way, Reno, NV 89502 […]
1 event,
0 events,
0 events,
1 event,
Asbestos Abatement Worker
This 40-hour course provides the initial EPA required training for abatement workers and covers the following topics: hazards and health effects of asbestos; medical monitoring and surveillance; legal rights of workers; PPE; specific procedures used on the job; site safety; engineering controls; negative air systems; decontamination; air monitoring; and OSHA standards that govern the work. […]
1 event,
2 events,
Traffic Control Technician
Traffic Control Technician
This 8-hour course was developed by LIUNA Training and is approved by NDOT to meet the requirements for personnel trained in Traffic Control on NDOT projects. This course is an introduction to temporary traffic control in work zones. Topics covered include the concepts, techniques, and practices used in the installation and maintenance of traffic control […]
2 events,
Traffic Control Supervisor
This 16-hour course was developed by LIUNA Training and is approved by NDOT to meet the requirements for personnel trained in Traffic Control on NDOT projects. This course covers the design, setup and maintenance of temporary traffic control in highway work zones. Topics covered include the implementation of traffic control plans; techniques for safe installation […]