Sign up for a training class by clicking on the class name and filling out the form.
Download a PDF of the training calendar here.
If you have any trouble registering online, reach out to us at
1-775-343-0171 or laborerstraining@local169.com
Calendar of Events
S Sun
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
0 events,
1 event,
MSHA Refresher
MSHA Refresher
This 8-hour class is for those members who have taken an MSHA new miner training within the last twelve months. It fulfills the annual refresher training requirement of MSHA. Topics include hazard recognition; electrical and mechanical hazards; silica and airborne hazards; and workplace rights. You must have a current MSHA certification to take this class. *Personal […]
1 event,
MSHA New Miner
This 24-hour class for new miners covers operations at Part 46 mining facilities and fulfills the MSHA training requirements to work for contractors at these facilities. Topics include hazard recognition; electrical and mechanical hazards; silica and airborne hazards; and workplace rights. Note: this training is not a substitute for site-specific training that your employer is […]
1 event,
1 event,
1 event,
NDOT Flagger
NDOT Flagger
This 4-hour certification course has been approved by the Nevada Department of Transportation and covers procedures for flaggers working on NDOT projects. All flaggers on these projects must have a certification of training in their possession while working. Topics include work zone hazards and safety; state regulations; flagging PPE and equipment; and flagging procedures.
0 events,
0 events,
1 event,
Forklift Operations and Safety
This 16-hour course covers the hazards and safe operation of rough terrain forklifts (also known as telehandlers). Topics include types of forklifts and terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include operating rough terrain forklifts of various sizes under simulated job site conditions. […]
2 events,
Solar Pile Driver
This 24-hour class covers operation and maintenance of the Vermeer PD10R pile driver. Topics covered include safety issues, functions of the machine, layout of piles on a typical solar project, and daily and periodic maintenance tasks that you will be expected to perform.
2 events,
Forklift Operations and Safety
This 16-hour course covers the hazards and safe operation of rough terrain forklifts (also known as telehandlers). Topics include types of forklifts and terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include operating rough terrain forklifts of various sizes under simulated job site conditions. […]
2 events,
NDOT Flagger
NDOT Flagger
This 4-hour certification course has been approved by the Nevada Department of Transportation and covers procedures for flaggers working on NDOT projects. All flaggers on these projects must have a certification of training in their possession while working. Topics include work zone hazards and safety; state regulations; flagging PPE and equipment; and flagging procedures. NDOT
Asbestos Worker Refresher
Asbestos Worker Refresher
This 8-hour course is for those who have taken an Asbestos Worker or refresher course within the last two years and satisfies EPA requirements for asbestos refresher training. Topics covered include: health effects of asbestos; medical monitoring and surveillance; worker rights and protections; PPE; site safety; preparing the work area; negative air systems; containment; decontamination; […]
0 events,
0 events,
2 events,
Skid Steer Operations and Safety
This 16-hour course covers the hazards and safe operation of skid steer loaders (i.e. Bobcat). Topics include terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include pre-operational inspections, review of the Owner’s Manual, and operating skid steers with forks under simulated job site conditions […]
Concrete Worker Part 1
This 40-hour course introduces members to concrete work and covers the following topics; safety and health hazards of concrete work; site preparation; form building and setting; forming systems; estimating concrete quantities; placement and consolidation; and finishing and curing concrete. Participants will gain knowledge and practical experience in the placement and finishing of concrete. *Personal Protective […]
3 events,
Traffic Control Technician
Traffic Control Technician
This 8-hour course was developed by LIUNA Training and is approved by NDOT to meet the requirements for personnel trained in Traffic Control on NDOT projects. We are on the Authorized List of Certified Traffic Control Technician training providers by the California Department of Transportation and will meet training requirements of CalTrans projects. This course […]
3 events,
Traffic Control Supervisor
This 16-hour course was developed by LIUNA Training and is approved by NDOT to meet the requirements for personnel trained in Traffic Control on NDOT projects. This course covers the design, setup and maintenance of temporary traffic control in highway work zones. Topics covered include the implementation of traffic control plans; techniques for safe installation […]
Skid Steer Ops and Safety
This 16-hour course covers the hazards and safe operation of skid steer loaders (i.e. Bobcat). Topics include terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include pre-operational inspections, review of the Owner’s Manual, and operating skid steers with forks under simulated job site conditions […]
3 events,
NDOT Flagger
NDOT Flagger
This 4-hour certification course has been approved by the Nevada Department of Transportation and covers procedures for flaggers working on NDOT projects. All flaggers on these projects must have a certification of training in their possession while working. Topics include work zone hazards and safety; state regulations; flagging PPE and equipment; and flagging procedures.
First aid/CPR
First aid/CPR
This 8-hour certification class helps non-medical professionals provide assistance in times of crisis.The first part of the class covers best practices for first aid for a wide range of medical conditions. The CPR portion of the class provides methods and practice for treating both adults and children during a cardiac emergency. *Personal Protective Equipment Required.
0 events,
0 events,
2 events,
Asbestos Worker
This 40-hour course provides the initial EPA required training for abatement workers and covers the following topics: hazards and health effects of asbestos; medical monitoring and surveillance; legal rights of workers; PPE; specific procedures used on the job; site safety; engineering controls; negative air systems; decontamination; air monitoring; and OSHA standards that govern the work. […]
Concrete Finishing
This 40-hour course focuses on the placement and finishing of slabs-on-grade. Participants will be introduced to and use various finishing equipment during hands-on activities. ACI methods and certification will be discussed and practiced. This class is for those Apprentices who have complete Concrete Worker Part 1 and Part 2, or journeymen with verified experience working […]
2 events,
2 events,
3 events,
Union Meeting at 7 p.m.
Union Meeting at 7 p.m.
All Local 169 members are invited to the monthly meeting. Learn what your Union is planning and working towards. Show up, show your support, and be an active member in your Union. An involved member is a strong member! Feel the Power! Meetings are at the Union Hall at 570 Reactor Way, Reno, NV 89502 […]
2 events,
0 events,
0 events,
1 event,
Forklift Operations and Safety
This 16-hour course covers the hazards and safe operation of rough terrain forklifts (also known as telehandlers). Topics include types of forklifts and terminology; identifying and avoiding hazards; inspection and maintenance; reviewing job site conditions; and safe operating practices. Hands-on activities will include operating rough terrain forklifts of various sizes under simulated job site conditions. […]
2 events,
Solar Pile Driver
This 24-hour class covers operation and maintenance of the Vermeer PD10R pile driver. Topics covered include safety issues, functions of the machine, layout of piles on a typical solar project, and daily and periodic maintenance tasks that you will be expected to perform.